hubs
Showing 1–9 of 23 results
-
Select optionsMORE INFOST280 FREEHUB BODY
$89.99Replacement freehub body options for the ST280 and ST280 BST (Boost) hub. Replacement freehub bodies come with new bearings installed.
* Rear hub shell logo states “Speed Tuned ST280” or “Speed Tuned ST280 BST”
***The ST280 and ST280 BST hubs require a 12mm as stated in the video. For information on how to change Super 6 series end caps please view this video.
The Shimano MicroSpline freehub is 12TA (Boost and 12x142TA) compatible only. It will not work with QR end caps.
-
Select optionsMORE INFOST300 SERIES FREEHUB BODY
$79.99Replacement freehub body options for the Speed Tuned ST300 hub. Replacement freehub bodies come with new bearings installed.
*Rear hub shell logo states “Speed Tuned ST300“
Tools required:
(1) 5mm Hex/Allen Wrench & (1) 12mm Hex/Allen Wrench
Steps:
1) Pull Non-Drive Side (NDS) end caps off (friction)
2) Insert 12mm hex wrench on NDS
3) Insert 5mm hex wrench on Drive Side (DS)
4) Loosen (opposite loosen to the right)
5) Pull off freehub
6) Inspect and clean area (as needed for dirt, dust, etc.), and replace axle spacer
-
Select optionsMORE INFOST170 & ST300 CONVERSION END CAPS
$25.99These are individual pairs of end caps for the Speed Tuned 170 Front hub and Speed Tuned 300 Rear hub. Please select your size.
NOTE: Options with a (*) next to them are not common axle sizes and are for specific bikes, they are not commonly used. Please make sure to check with a shop or your bicycle manufacturer if you are unsure of the size you need.
** These end caps are for use specifically with ST170 Front hubs and ST300 Rear hubs.
***The ST170 and ST300 hubs require a 12mm as stated in the video. For information on how to change ST170 and ST300 series end caps please view this video.
-
Select optionsMORE INFOST160 & ST280 CONVERSION END CAPS
$29.99These are individual pairs of end caps for the Speed Tuned 160 Front hub and Speed Tuned 280 Rear hub. Please select your size.
NOTE: Options with a (*) next to them are not common axle sizes and are for specific bikes, they are not commonly used. Please make sure to check with a shop or your bicycle manufacturer if you are unsure of the size you need.
** These end caps are for use specifically with ST160 Front hubs and ST280 Rear hubs.
***The ST160 and ST280 hubs require a 12mm as stated in the video. For information on how to change ST160 and ST280 series end caps please view this video.
-
Select optionsMORE INFOSUPER 6 GEN 1.0 HUB SET
$249.00The Super 6 1.0 hub is Speed Tuned’s first step into the hub market. It introduces an incredibly durable, yet flexible axle design that will prove dependable for aggressive cross country and trail riding. It features convenient convertibility from Quick Release to Thru-Axle, depending on what your bike needs. It is built with Enduro sealed bearings and has 24 Points of engagement. The new Super 6 1.0 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
***The Super 6 1.0 hubs require an 12mm allen wrench. For information on how to change Super 6 series end caps please view this video.
-
Select optionsMORE INFOSPEED TUNED ST280 BOOST SERIES HUB SET
$399.00The Speed Tuned ST280 BST hub is the boost version of the Speed Tuned ST280 hub. It is a complete redesign of the previous gen Super 6 hub and has been upgraded with a super over sized drive ring, 6 3×2 offest over sized pawls and a stronger axle. It is built with Enduro sealed bearings and has 72 Points of engagement. The new Speed Tuned ST280 BST hub set can be converted to run either Shimano freehub bodies or SRAM XD drivers.
***The Speed Tuned ST280 and Speed Tuned ST280 BST hubs use a 12mm allen wrench as stated in the video. For information on how to change Speed Tuned ST280 series end caps please view this video.
-
Select optionsMORE INFOSPEED TUNED ST280 SERIES HUB SET
$399.00The Speed Tuned ST280 hub is a complete redesign of the previous gen Super 6 2.0 hub. It has been upgraded with a super over sized drive ring, 6 3×2 offset over sized pawls and a lightweight, stronger axle. It is built with Enduro sealed bearings and has 72 Points of engagement. The new Speed Tuned ST280 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehubs or SRAM XD drivers.
***The Speed Tuned ST280 and Speed Tuned ST280 BST hubs use a 12mm allen wrench as stated in the video. For information on how to change Speed Tuned ST280 series end caps please view this video.
-
Select optionsMORE INFOSPEED TUNED ST300 BOOST SERIES HUBSET
$299.00The Speed Tuned ST170/300 hub offers a redesign of the original Speed Tuned D series hub shell, saving weight and allowing for convertible end caps and freehubs, as well as an improvement in bearing quality. The freehub engagement offers the same rock solid system from the original D-Series hubs, meant to offer a reliable engagement that will stand up to the considerable strain of today’s 1x drivetrains. The new Speed Tuned ST160 / ST300 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
-
Select optionsMORE INFOSPEED TUNED ST300 SERIES HUB SET
$299.00The Speed Tuned ST170/300 hub offers a redesign of the original Speed Tuned D series hub shell, saving weight and allowing for convertible end caps and freehubs, as well as an improvement in bearing quality. The freehub engagement offers the same rock solid system from the original D-Series hubs, meant to offer a reliable engagement that will stand up to the considerable strain of today’s 1x drivetrains. The new Speed Tuned ST160 / ST300 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.