EVO RACE CARBON GLOSS 29″ – INDUSTRY 9 WHEEL SET CLOSEOUT
$2,199.00
The Evo Race Carbon wheel set boasts a 22mm inner width rim channel with a stout hookless bead and tubless compliant profile. Hookless beads give the advantage of having more carbon material where you need it most to protect the rim from impact damage and a 22mm inner width borders on an agressive trail rim width, however it is still light enough for XC racing use. The Evo Race Carbon will give you confidence when going into questionable trail sections with a reassuring stiffness you can always trust will go where you point the bars. The Industry 9 hubs feature a 120 point engagement system to assist on those rocky and rooted technical climbs.
*Price only valid on Evo Race Carbon (29″) with Gloss Black finish and Black Industry 9 Torch, 6 Bolt, 32 hole hubs. No substitutions will be accepted.
** A Maximum of (3) Wheel Sets may be purchased per customer.
Description
| Evo Race Carbon Gloss 29″ | ||
| 29″ Weight | Front: 725g / Rear: 845g | Set: 1570g |
| Hub | Front: Industry 9 Torch (Black) | Rear: Industry 9 Torch (Black) |
| Spoke Count | Front: 32H | Rear: 32H |
| Spoke Pattern | Front: 3 Cross | Rear: 3 Cross |
| Rim | Carbon Hookless Bead Tubeless Ready | |
| Inner Width | 22mm | |
| Outer Width | 28mm | |
| Rim Depth | 24mm | |
| Spokes | Sapim D-Light TCS 2.0/1.65/2.0 Butted Stainless Spokes Black | |
| Nipples | Sapim Alloy Double Square Black | |
| Bearings | Sealed Cartridge Enduro Bearings | |
| Points of Engagement | 120 (3 degrees) 6 pawls | |
| Freehub | Shimano/SRAM 9/10/11 speed or SRAM XD 11 speed | |
| Axle Configuration: | Thru-Axle Front 15mm x 100mm / Thru-Axle Rear 12mm x 142mm **Boost Front 15mm x 110mm / **Boost Rear 12mm x 148mm |
|
** Different hub required
Only logged in customers who have purchased this product may leave a review.
Related products
-
Select optionsMORE INFOSPEED TUNED ST280 SERIES HUB SET
$399.00The Speed Tuned ST280 hub is a complete redesign of the previous gen Super 6 2.0 hub. It has been upgraded with a super over sized drive ring, 6 3×2 offset over sized pawls and a lightweight, stronger axle. It is built with Enduro sealed bearings and has 72 Points of engagement. The new Speed Tuned ST280 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehubs or SRAM XD drivers.
***The Speed Tuned ST280 and Speed Tuned ST280 BST hubs use a 12mm allen wrench as stated in the video. For information on how to change Speed Tuned ST280 series end caps please view this video.
-
Select optionsMORE INFOSPEED TUNED ST300 BOOST SERIES HUBSET
$299.00The Speed Tuned ST170/300 hub offers a redesign of the original Speed Tuned D series hub shell, saving weight and allowing for convertible end caps and freehubs, as well as an improvement in bearing quality. The freehub engagement offers the same rock solid system from the original D-Series hubs, meant to offer a reliable engagement that will stand up to the considerable strain of today’s 1x drivetrains. The new Speed Tuned ST160 / ST300 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
Reviews
There are no reviews yet.