Our Hubs
Showing all 9 results
-
Select optionsMORE INFOSPEED TUNED ST280 BOOST SERIES HUB SET
$399.00The Speed Tuned ST280 BST hub is the boost version of the Speed Tuned ST280 hub. It is a complete redesign of the previous gen Super 6 hub and has been upgraded with a super over sized drive ring, 6 3×2 offest over sized pawls and a stronger axle. It is built with Enduro sealed bearings and has 72 Points of engagement. The new Speed Tuned ST280 BST hub set can be converted to run either Shimano freehub bodies or SRAM XD drivers.
***The Speed Tuned ST280 and Speed Tuned ST280 BST hubs use a 12mm allen wrench as stated in the video. For information on how to change Speed Tuned ST280 series end caps please view this video.
-
Select optionsMORE INFOSPEED TUNED ST280 SERIES HUB SET
$399.00The Speed Tuned ST280 hub is a complete redesign of the previous gen Super 6 2.0 hub. It has been upgraded with a super over sized drive ring, 6 3×2 offset over sized pawls and a lightweight, stronger axle. It is built with Enduro sealed bearings and has 72 Points of engagement. The new Speed Tuned ST280 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehubs or SRAM XD drivers.
***The Speed Tuned ST280 and Speed Tuned ST280 BST hubs use a 12mm allen wrench as stated in the video. For information on how to change Speed Tuned ST280 series end caps please view this video.
-
Select optionsMORE INFOSPEED TUNED ST300 BOOST SERIES HUBSET
$299.00The Speed Tuned ST170/300 hub offers a redesign of the original Speed Tuned D series hub shell, saving weight and allowing for convertible end caps and freehubs, as well as an improvement in bearing quality. The freehub engagement offers the same rock solid system from the original D-Series hubs, meant to offer a reliable engagement that will stand up to the considerable strain of today’s 1x drivetrains. The new Speed Tuned ST160 / ST300 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
-
Select optionsMORE INFOSPEED TUNED ST300 SERIES HUB SET
$299.00The Speed Tuned ST170/300 hub offers a redesign of the original Speed Tuned D series hub shell, saving weight and allowing for convertible end caps and freehubs, as well as an improvement in bearing quality. The freehub engagement offers the same rock solid system from the original D-Series hubs, meant to offer a reliable engagement that will stand up to the considerable strain of today’s 1x drivetrains. The new Speed Tuned ST160 / ST300 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
-
Select optionsMORE INFOSUPER 6 2.0 BOOST HUBSET
$299.00The Super 6 BST hub is the boost version of the Super 6 2.0 hub. It is a complete redesign of the original Super 6 hub and has been upgraded with an over sized drive ring, 4 over sized pawls and a stronger axle. It is built with Enduro sealed bearings and has 36 Points of engagement. The new Super 6 BST hub set can be converted to run either Shimano freehub bodies or SRAM XD drivers.
***The Super 6 2.0 and Super 6 BST hubs require an 11mm allen wrench and not a 12mm as stated in the video. For information on how to change Super 6 series end caps please view this video.
-
Select optionsMORE INFOSUPER 6 2.0 HUB
$299.00The Super 6 2.0 hub is a complete redesign of the original Super 6 hub. It has been upgraded with an over sized drive ring, 4 over sized pawls and a stronger axle. It is built with Enduro sealed bearings and has 36 Points of engagement. The new Super 6 2.0 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
***The Super 6 2.0 and Super 6 BST hubs require an 11mm allen wrench and not a 12mm as stated in the video. For information on how to change Super 6 series end caps please view this video.
-
Select optionsMORE INFOS-SERIES HUB
$259.00The Speed Tuned S-Series hub set is designed specifically for road bikes. It is light weight and durable using EZO Japan sealed bearings to roll smoothly. The front hub is available in 20 or 24 hole and the rear hub is available in 24 or 28 hole options that can be mixed and matched depending on wheel set specification.
-
Select optionsMORE INFOSUPER 6 GEN 1.0 HUB SET
$249.00The Super 6 1.0 hub is Speed Tuned’s first step into the hub market. It introduces an incredibly durable, yet flexible axle design that will prove dependable for aggressive cross country and trail riding. It features convenient convertibility from Quick Release to Thru-Axle, depending on what your bike needs. It is built with Enduro sealed bearings and has 24 Points of engagement. The new Super 6 1.0 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
***The Super 6 1.0 hubs require an 12mm allen wrench. For information on how to change Super 6 series end caps please view this video.
-
Select optionsMORE INFOSPEEDTUNED D-SERIES HUBSET
$199.00The Speed Tuned D-Series hub is our value driven, sealed bearing mountain bike hub. This hub is designed with excellent performance and reliability in mind and relies on a simple, non convertible design to achieve its purpose. If you are looking for a great performing hub, but want to stick to your budget, the D-Series hub is an excellent choice.
For riders looking for a lighter weight hub set with higher POE and end cap/ freehub body convertibility, check out our Super 6 2.0/BST hubs!