EXILE CARBON GLOSS (27.5″) – INDUSTRY 9 WHEEL SET CLOSEOUT
$2,199.00
The Exile Carbon wheel set has a 29mm inner width rim channel with a hookless bead and tubless compliant profile. Hookless beads give the advantage of having more carbon material where you need it most to protect the rim from impact damage and a 29mm inner width for increased tire contact and unwavering stiffness, however it is still light enough to power uphill. The Industry 9 Torch hubs feature a 120 point engagement system to assist on rocky and rooted technical climbs.
*Price only valid on Exile Carbon 650b (27.5″) with Gloss Black finish and Black Industry 9 Torch, 6 Bolt, 32 hole hubs. No substitutions will be accepted.
** A Maximum of (3) Wheel Sets may be purchased per customer.
Description
| Exile Carbon Gloss Finish 650b | ||
| 27.5″ (650b) Weight | Front: 760g / Rear: 890g | Set: 1650g |
| Hub | Front: Industry 9 Torch (Black) | Rear: Industry 9 Torch (Black) |
| Spoke Count | Front: 32H | Rear: 32H |
| Spoke Pattern | Front: 3 Cross | Rear: 3 Cross |
| Rim | Carbon Hookless bead Tubeless Ready | |
| Inner Width | 29mm | |
| Outer Width | 35mm | |
| Rim Depth | 24mm | |
| Spokes | Sapim D-Light TCS 2.0/1.65/2.0 Butted Stainless Spokes Black | |
| Nipples | Sapim Alloy Double Square Black | |
| Bearings | Sealed Cartridge Bearings | |
| Points of Engagement | 120 (3 degree) 6 pawls | |
| Freehub | Shimano/SRAM 9/10/11 speed or SRAM XD 11 speed | |
| Axle Configuration: | Thru-Axle Front 15mm x 100mm / Thru-Axle Rear 12mm x 142mm **Boost Front 15mm x 110mm / **Boost Rear 12mm x 148mm |
|
** Different hub required
Only logged in customers who have purchased this product may leave a review.
Related products
-
Select optionsMORE INFODT SWISS MTB WHEELSET BUILDER
$899.99Build your custom 32H DT SWISS mountain wheelset with four rim models and 3 hub options to choose from!
- Wheelsets Built with Sapim D-Light Spokes and Black Alloy Nipples.
- Only available as wheelset.
- Come with Tubeless tape and valves installed.
-
Select optionsMORE INFOEASTON/RACEFACE MTB WHEELSET BUILDER
$799.99Build your custom 32H Easton Cycling wheelset with three rim models and three hub options to choose from!
- Wheelsets Built with Sapim D-Light Spokes and Black Alloy Nipples.
- Only available as wheelset.
- Come with Tubeless tape and valves installed.
-
Select optionsMORE INFOSUPER 6 2.0 REPLACEMENT END CAPS
$27.99These are individual pairs of end caps for the Speed Tuned Super 6 2.0 Hub Set. Please select your size.
NOTE: Options with a (*) next to them are not common axle sizes and are for specific bikes, they are not commonly used. Please make sure to check with a shop or your bicycle manufacturer if you are unsure of the size you need.
** Rear hub shell logo states “Speed Tuned Wheels 2.0” and the logo is located closest to the drive side of the hub.
***The Super 6 2.0 and Super 6 BST hubs require an 11mm allen wrench and not a 12mm as stated in the video. For information on how to change Super 6 series end caps please view this video.
Reviews
There are no reviews yet.