SPEED TUNED ST280 SERIES HUB SET
$399.00
The Speed Tuned ST280 hub is a complete redesign of the previous gen Super 6 2.0 hub. It has been upgraded with a super over sized drive ring, 6 3×2 offset over sized pawls and a lightweight, stronger axle. It is built with Enduro sealed bearings and has 72 Points of engagement. The new Speed Tuned ST280 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehubs or SRAM XD drivers.
***The Speed Tuned ST280 and Speed Tuned ST280 BST hubs use a 12mm allen wrench as stated in the video. For information on how to change Speed Tuned ST280 series end caps please view this video.
Description
| Front Hub | ||
| Weight | 160g | |
| Bearings | Enduro Sealed Bearings |
|
| Drilling | 32H | |
| End Caps | 9mm x 100mm Quick Release/ 12mm x 100mm Thru-Axle/15mm x 100mm Thru-Axle | |
|
Other Options
|
See Boost 15mm x 110mm Hub Page
|
|
| Rear Hub | ||
| Weight | 280g | |
| Bearings | Enduro Sealed Bearings |
|
| Drilling | 32H | |
| Freehub | Shimano/SRAM 8/9/10/11(road) or SRAM XD 11/12 speed or SRAM XDR Road 12 speed or Shimano MicroSpline 12 speed | |
| Points of Engagement | 72 (5 degrees) with 6 pawls (3×2 offset) | |
| End Caps | 10mm x 135mm Quick Release/ 10mm x 135mm Thru-Axle/ 12mm x 142mm Thru-Axle | |
| Other Options | See Boost 12mm x 148mm Hub Page | |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Select optionsMORE INFOSUPER 6 GEN 1.0 HUB SET
$249.00The Super 6 1.0 hub is Speed Tuned’s first step into the hub market. It introduces an incredibly durable, yet flexible axle design that will prove dependable for aggressive cross country and trail riding. It features convenient convertibility from Quick Release to Thru-Axle, depending on what your bike needs. It is built with Enduro sealed bearings and has 24 Points of engagement. The new Super 6 1.0 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
***The Super 6 1.0 hubs require an 12mm allen wrench. For information on how to change Super 6 series end caps please view this video.
-
Select optionsMORE INFOSPEED TUNED ST300 SERIES HUB SET
$299.00The Speed Tuned ST170/300 hub offers a redesign of the original Speed Tuned D series hub shell, saving weight and allowing for convertible end caps and freehubs, as well as an improvement in bearing quality. The freehub engagement offers the same rock solid system from the original D-Series hubs, meant to offer a reliable engagement that will stand up to the considerable strain of today’s 1x drivetrains. The new Speed Tuned ST160 / ST300 hub set is available in multiple end cap configurations and can be converted to run either Shimano freehub bodies or SRAM XD drivers.
-
Select optionsMORE INFOSUPER 6 2.0 REPLACEMENT END CAPS
$27.99These are individual pairs of end caps for the Speed Tuned Super 6 2.0 Hub Set. Please select your size.
NOTE: Options with a (*) next to them are not common axle sizes and are for specific bikes, they are not commonly used. Please make sure to check with a shop or your bicycle manufacturer if you are unsure of the size you need.
** Rear hub shell logo states “Speed Tuned Wheels 2.0” and the logo is located closest to the drive side of the hub.
***The Super 6 2.0 and Super 6 BST hubs require an 11mm allen wrench and not a 12mm as stated in the video. For information on how to change Super 6 series end caps please view this video.
Reviews
There are no reviews yet.